Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars
$24.99 - $39.99
Lightweight aluminum construction with a versatile riser bar design.
$44.99
Specialized Alloy Mini Rise Handlebars area wide handlebar made of premium alloy with a minimal 10mm of rise.
- High-strength 7000-series premium aluminum alloy
- Rise: 10mm
- Width: 750mm and 780mm
- Clamp diameter: 31.8mm
$54.99 - $59.99
Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise.
- Premium butted aluminum, high-strength design
- Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort
- Shallow bend drop design: 123mm drop x 75mm reach
- UCI legal, compatible with Shimano, SRAM, and Campagnolo controls
- Front of bar optimized for dual-cable routing
$54.99 - $59.99
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range.
- 15mm rise for additional rider fit range.
- Constructed from 2014 Premium Butted Aluminum for a high-strength design.
- Shallow Bend Drop: 123mm drop x 75mm reach
$44.99
- 6061 Premium butted Aluminum, high-strength design.
- Short reach for optimal brake/shift control.
- Shallow Bend Drop: 125mm drop x 65mm reach
$299.99 - $319.99
Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge.
- Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar
- Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at
225g (size 42cm)
- Innovative features, like textured tops and a smooth bar tape step, enhance your
experience
- Bend: 125mm drop x 75mm reach
$249.99
Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control.
- Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar
- Ergonomic top perch alleviates pressure on the hands
- Bar flared 12 degrees at the drops for added stability
- Bend: 103mm drop x 70mm reach
$69.99
- Traditional compact road bar available in multiple widths
- AL6061-T6 alloy construction
- ISO-Road safety certified
$39.95
- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width
- 9-degree backsweep and 5-degree upsweep for comfort at all angles
- Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction
- Plus model uses 7050 aluminum for an ideal strength to weight ratio
- Base Handlebar uses 6061 aluminum
$69.95
- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width
- 9 degree backsweep and 5 degree upsweep for comfort at all angles
- Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction
- Plus model uses 7050 aluminum for an ideal strength to weight ratio
- Base Handlebar uses 6061 aluminum
$139.00
A 35mm clamp bar with 20mm and 35mm rise options and 800mm width
- 9-degree backsweep and 5-degree upsweep for comfort at all angles
- Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction
- Plus model uses 7050 aluminum for an ideal strength-to-weight ratio
- Base Handlebar uses 6061 aluminum
$352.00
The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD).
The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops.
- Updated distinctive Zipp cosmetics
- 70mm reach and 128mm drop allows for a low and aero drops position
- Internal cable routing is easy with Rapid Route
- Lifetime warranty
$296.00
Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar.
- Updated distinctive Zipp cosmetics
- Unidirectional carbon built for stiffness, comfort, and light weight
- Flattened top shape with 3° backsweep for comfort
- Variable radius drop for multiple hand positions and deeper movement into the drop.
- Lifetime warranty
$59.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love.
- 6061 aluminum for low weight and durability
- 70mm reach and 128mm drop for a short-low position
- Flattened top shape to better fit the hand
- ISO 4210 compliant
$59.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare.
- Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding.
- The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul.
- Reach: 70mm
- Drop: 115mm
$59.00
When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types.
- New flattened bar top and 3° backsweep for a neutral wrist position on the tops
- 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops
- 80mm reach and 125mm drop for a medium-high position
- 6061 aluminum for low weight and durability
- Di2 RS910 junction compatible
- Compatible with clip-on extensions (sold separately)
$118.00
The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position.
- Distinctive Zipp cosmetics
- 7050 aluminum for light weight and durability
- 70mm reach and 128mm drop for a short-low position
- Flattened top shape with 3° backsweep for comfort
- Clip-on Compatible (40, 42, 44cm sizes only)
- Lifetime warranty
$118.00
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position.
- Distinctive Zipp cosmetics
- 7050 aluminum for light weight and durability
- 70mm reach and 128mm drop for a short-low position
- Matte Black nano blast aluminum
- Clip-on Compatible
- Lifetime warranty
$118.00
This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward.
- Distinctive Zipp cosmetics
- 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion
- 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods
- Ergonomic top with 3° backsweep
- Lifetime warranty
$118.00
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types.
- Distinctive Zipp cosmetics
- 7050 aluminum for light weight and durability
- 80mm reach and 125mm drop for a medium-high position
- Flattened top shape with 3° backsweep for comfort
- Clip-on Compatible (40, 42, 44cm sizes only)
- Di2 RS910 junction compatible
- Lifetime warranty
$118.00
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum.
- Distinctive Zipp cosmetics
- 7050 Aluminum
- 80mm reach/125mm drop designed to fit a large number of riders
- Clip-on compatible
- Lifetime warranty
$968.00
Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement.
- Market-leading adjustability in pad fore-aft, width, height, and angle
- Integrated Carbon Aerobar works with any 31.8mm clamp stem
- Integrated SRAM eTap AXS Blip box mount in the Center Cap
- Rapid Routing cable exits are positioned for easy installation of brake cables
- Vuka Aero ships with base bar, extension clamp, and armrest clamp
- Extensions sold separately
$78.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider.
- 7050 Alloy
- 282g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 12°
- Measured Center-to-Center at the levers
$78.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.
- 7050 Alloy
- 282g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 24°
- Measured Center-to-Center at the levers
$158.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$78.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
$225.00
The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls.
- Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls
- Drop/Reach: 115/68mm
$225.00
The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.
$145.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package.
- Unidirectional carbon fiber construction
- 35mm stem clamp
- 8 degrees of backsweep with 5 degrees of upsweep
- Trimmable ends, made easy with graphic markings
- Rated to ASTM Condition 4 for extreme off-road riding
$60.00
Ergonomnic and elegant, the Whisky 438 Aluminum Scully Bar brings much needed relief for long hours in the saddle – without compromising reach or stem length. The 23-degree backsweep and 5-degree upsweep create an easy, natural handling position, leaving little room for tricep fatigue. The generous clamping space and clean, lightweight design means this ISO tested bar tastes all types of terrain. For a custom feel, the Scully Bar comes in two trimmable widths (820mm and 780mm) to perfect your grip length and enhance overall performance.
$190.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds.
- Compatible with road, mountain, and bar-end controls
- Tested to ASTM 3
- 90mm clamping area to fit Salsa Anything Cradle
- Can be ridden in up or down position
- Unidirectional carbon fiber construction
- Weight: 250g
$82.49
WeThePoeple Pro rider, Dan Kruk, is somewhat of a connoisseur of handlebars, so it is only right that he have his own signature model. Named after his home town in Wisconsin, the Stallis bar is built to withstand Dan’s all-out savagery on a bike and comes in both regular 22.2mm and 25.4mm oversize clamping options.
$24.99 - $32.99
This mid-rise handlebar provides smooth lines and pure comfort
- Black powder coat
- 1"(25.4mm) clamp, 5.25" rise, 27" wide
- Handmade in Maysville, Kentucky
$24.99
This classic touring handlebar is great for bicycle restorations or for adding a touch of traditional class to any bike
- 1"(25.4mm) clamp, 2.5" rise, 23.75" wide
- Handmade in Maysville, Kentucky
$28.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Chrome finish
- Made in the USA
- Weight: 372g
- Lever Compatability: Mountain 22.2mm
$28.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Chrome finish
- Made in the USA
- Weight: 726g
- Lever Compatibility: Mountain 22.2mm
$30.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Chrome finish
- Made in the USA
- Weight: 862g
- Lever Compatibility: Mountain 22.2mm
$29.99
- 1"(25.4mm) clamp, 10.4" Rise, 23.5" Width
- Handmade in Maysville, Kentucky
$594.99
- The stiffest and most aero integrated handlebar and stem system
- All carbon construction
- Di2 compatible with integrated junction box compartment and wiring conduits
- Compact 125mm drop, 80mm reach
- 395g
$53.00
Vision Team clip on aerobars are fixed extensions with adjustable length.
- For 31.8mm base bar
- Material: Alloy
- Color: black
- Length: 230-270
- Defined Color: Black
- Weight: 464
$87.80
- Aero alloy construction with flattened top and aerodynamic integrated cable routing
- 10 deg forward angle for a more natural wrist position, with 4 deg outward bend placing the drops 10mm wider than at the hoods
- Shot peen black anodized finish
- Width measured center to center
- 310g (42cm)
$55.00
For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well.
The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area.
These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size.
- Weight: 292g
- Drop: 110mm
- Drop Bend Style: Compact
- Reach: 76mm
- Material: Aluminum
- Bar Top Style: Round
$42.00
A casual riding handlebar designed so the grips flare out a bit
22.2mm (MTB size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size
$42.00
A casual riding handlebar designed so the grips flare out a bit.
23.8mm (road-size) bars accept standard inverse brake levers, standard bar-end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters
$35.00
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too.
The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy.
Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
$35.00
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars.
They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm.
The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes.
These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both):
- 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size.
- 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
$190.00
Nail 20mm Carbon Riser Bar
- Created from UD carbon
- Stealth black graphics on matte black
- Anti-vibration taper technology for total control
$409.00
- Ideal handlebar for road and gravel applications
- Flat section on the top makes it a comfortable bar for long days in the saddle
- Cable routing for the integration of a Di2 bar-end junction box
- 198g (42cm)
- Maximum rider weight of 220lbs
$75.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width.
- 760mm wide
- Wide to start and trimmable by 30mm each side
- Made from tough 7050 lightweight aluminum
SPECIFICATIONS
- Type: Riser
- Application: XC
- Clamp Diameter: 31.8mm
- Width: 760mm
- Backsweep (degrees): 9
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface.
- Upsweep: 5°
- Backsweep: 9° (760mm bars)
- Backsweep: 7° (all other bars)
$194.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day.
- Available in 760mm carbon with 20mm rise
- 35mm clamp
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
SPECIFICATIONS
- Type: Riser
- Clamp Diameter: 35.0mm
- Width: 760mm
- Rise: 20mm
- Backsweep (degrees): 7
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Stiff, precise, and super-wide
- Made with tough 7050 alloy
- Descendent geometry from TruVativ's best enduro rider’s input
- Backsweep: 9°
- Upsweep: 5°
$194.00
RIP, NO RATTLE.
Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 35.0mm
- Width: 800mm
- Material (HB): Carbon
- Rise (HB): 25mm
- Type (bar): Riser
- Backsweep (degrees): 9
- Upsweep (degree): 5
$75.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control.
- Stiff, precise, and super-wide
- Made with tough 7050 alloy
- Descendant geometry from TruVativ's best enduro rider’s input
- Backsweep: 7°
- Upsweep: 5°
$200.00
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners.
- Stiff, precise, and width-optimized for enduro, trail and aggressive xc
- Carbon fiber perfection
- DESCENDANT geometry from their best enduro rider’s input
- Signature Troy Lee Designs style
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Material: Al-7050
- Width: 800mm
- Backsweep: 9-degrees
- Rise: 25mm
- Upsweep: 5-degrees
- Colors: Black
$194.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm, 800mm
- Material (HB): Carbon
- Rise (HB: 25mm
- Type (bar): Riser
- Upsweep (degree): 5
$70.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control.
- Material: Al-7050
- Width: 760mm
- Backsweep: 7-degrees
- Rise: 20mm
- Upsweep: 5-degrees
- Colors: Black
$100.00
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair.
- Includes Rockshox sticker pack to give fork and handlebar a unified custom look
- Stiff, precise and wide
- Signature Troy Lee Designs style
- Geometry and 7050 aluminum are designed for DH and gravity events
- Back Sweep (deg): 9
- Upsweep: 5
- Weight: 349g
- Material: Aluminum
Page 1 of 7
Next page